First offshore export cable installed at Inch Cape

The first of Inch Cape Offshore Wind Farm’s two 85-kilometre offshore export cables has been successfully installed off the east coast of Scotland.
The 220 kV, three-phase export cable was installed in three 28-kilometre sections by Enshore Subsea using the CMOS Installer cable lay vessel operating from the Port of Blyth. Once operational, it will transmit power from the 1.1 gigawatt (GW) wind farm to the project’s new onshore substation under construction at Cockenzie, East Lothian



The cable required two offshore joints which were completed using North Sea Giant and will shortly be buried in the seabed.
Manufactured by Ningbo Orient Wires & Cables Co. Ltd (Orient Cable), the 2000mm² cable is among the largest AC export cables in the world. The second 85-kilometre export cable will also be installed by Enshore Subsea in three 28-kilometre sections during a later campaign in 2026.
Inch Cape is well into its offshore construction phase with both the offshore substation platform and the first export cable installed, and the first of its XXL monopiles delivered to the Port of Leith. Next year will see the project’s monopile and jacket foundations installed along with the first of 72 Vestas 15MW turbines and the completion of the onshore substation.



The project is on track for first power in late-2026 and full commercial operations in 2027.
Inch Cape is owned in a 50/50 equal joint venture by ESB and Red Rock Renewables, and once complete will generate almost 5 terawatt hours (TWh) of energy each year or enough to power half of the homes in Scotland.



